Specifications

Product Name	USB Short Circuit Tester	USB-C Short Circuit Tester
Connector Type	Type-A	Type-C
Product Code	PM119	PM219
Fault Detection	Over Voltage on VBUS, Under Voltage on VBUS, Short circuit between VBUS and any of the data lines, Invalid voltage on data lines	Over Voltage on VBUS, Under Voltage on VBUS, Short circuit between VBUS and any of the data lines, Invalid voltage on data lines
Pass Indicator	1x Green "PASS" sign, Illuminates when all voltages are within the specification	1x Green "PASS" sign, Illuminates when all voltages are within the specification
Failure Indicators	7x Red LEDs for indicating a bad voltage on VBUS, D+, D-, SSRX+, SSRX-, SSTX+, SSTX- VBUS Red LED turns on if: 5.5V < VBUS < 7.75V D+ or D- Red LED turns on if: V > 3.9V SSRX+ or SSRX- or SSTX+ or SSRX- Red LED turns on if: V > 1.5V	7x Red LEDs for indicating a bad voltage on VBUS, D+, D-, SSRX+, SSRX-, SSTX+, SSTX- VBUS Red LED turns on if: 5.8V < VBUS < 7.7V SS 1 Red LED turns on if: TX1- or TX1+ or RX1- or RX1+ > 1.4V SS 2 Red LED turns on if: TX2- or TX2+ or RX2- or RX2+ > 1.4V SBU Red LED turns on if: SBU1 or SBU2 > 3.5V VCON Red LED turns on if: VCONN > 5.8V CC Red LED turns on if: CC > 2.2V D+D- Red LED turns on if: D+ or D- > 3.8V
Over Voltage Protection	Up to +-75V (VBUS and data lines)	Up to +-75V on all lines
Operational Voltage	3.85V - 5.5V	3.85V - 5.8V
Operational Current	90mA	90mA
Data Signal Transmission Testing	No - Use the USB 3.0 Loopback Plug	No - Use the USB 3.0 Loopback Plug
Electrical Load Testing	No - Use the USB Power Delivery Tester	No - Use the USB Power Delivery Tester
Size	66mm x 24mm x 15mm (2.6 x 0.9 x 0.6 inches)	62mm x 27mm x 12mm (2.4 × 1.1 × 0.5 inches)
Weight	15g (0.5oz)	15g (0.5oz)
Storage Temperature	-30 ºC to + 80 ºC	-30 ºC to + 80 ºC
Usage Temperature	0 ºC to 70ºC	0 ºC to 70ºC
RoHS (Lead free)	Yes, see compliance page	Yes, see compliance page

The specifications above are for the PassMark USB Short Circuit Tester hardware revision 001 (for both PM119 and PM219)