Specifications
| Product Code | PM320 |
|---|---|
| USB Standard |
USB 3.2 Gen 1 USB 3.2 Gen 2 USB 3.2 Gen 1x2 USB 3.2 Gen 2×2 USB Power Delivery Specification Revision 3.1 |
| Plug and Play | Compliant |
| Physical Connector |
Test port: USB-C Debug port: USB-C External Load port: Nano-Fit Header |
| Included Cables | High-quality USB-C to USB-C cable (supporting up to 80Gbps and 240W) with length of 0.5m |
| USB Transfer Modes | Bulk and Isochronous |
| Voltage (Test Port) | 4.5V - 48.0V (No external power supply is required) |
| Absolute Maximum (Test port) |
VBUS: 58V CC: 58V USB2 (D+D-): 4V USB3 (SuperSpeed): 2V SBU: Not Used |
| Current (Test Port) | 80mA @ 5V (idle) 350mA @ 5V (with only speed test running) |
| Voltage (Debug Port) | 4.5V - 5.5V |
| Current (Debug Port) | When device is not powered by Test port: 80mA @ 5V (idle) 350mA @ 5V (with only speed test running) |
| External Load Current Output | 3A max without concurrent data testing 1A max with concurrent data testing |
| External Load Current Accuracy | +/-10% when current draw is at or above 500mA +/-20% when current draw is from 100mA - 500mA |
| Voltage Accuracy (Test Port) | +/-2% |
| Clock speed | 24MHz |
| Device memory | 256Mbit |
| Case | Black ABS plastic |
| Size | 99mm x 56mm x 14mm (3.9 x 2.2 x 0.6 inches) |
| Weight | 59g (2.1oz) |
| Indicators |
White LED = Power from USB bus Green LED = Transmit data Blue LED = Receive data Red LED = Error indicator |
| ESD immunity |
IEC 61000-4-2 Level 4 Protection (Contact Voltage: 8kV; Air Gap Voltage: 15kV) |
| Storage Temperature | -30 ºC to 80 ºC |
| Usage Temperature | -10°C to 40°C |
| Max speed | 10Gbps per lane, 20Gbps aggregate |
| RoHS (Lead free) | Yes, see compliance page |
The specifications above are for the PassMark USB-C 20G Loopback plug hardware revision 1.
Included
- A high-quality USB-C to USB-C cable. This cable has a length of 0.5 metres, supports up to 80 Gbps data transfer speeds, and is rated for 240W of power delivery.
- The USB-C 20G Test USB-C 20G Test Windows Application software. This is the software used to connect the device to a PC and run the test procedures.
- The API documentation. There is an API used by the USB-C 20G Test Windows Application that allows a PC to communicate with the USB 20Gbps Loopback Plug. Documentation for using this API is provided to allow the possibility of creating your own custom automated testing scripts.
