PassMark Software

Announcement

Collapse
No announcement yet.

3D Test interrupted

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 3D Test interrupted

    I keep getting this error when testing machines with Nvidia cards. I have read the FAQ and gone through the list without success. All 3 machines where different configurations built around Kaby Lake CPU and Nvidia cards. I have disabled all power management, all are clean installs with latest drivers, are Windows 10 (activated) with no other software installed. All fail the 3D test but the cards pass using Furmark.

    Log Name: System
    Source: Display
    Date: 06/07/2017 18:32:58
    Event ID: 4101
    Task Category: None
    Level: Warning
    Keywords: Classic
    User: N/A
    Computer: DESKTOP-14CPKUF
    Description:
    Display driver nvlddmkm stopped responding and has successfully recovered.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Display" />
    <EventID Qualifiers="0">4101</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2017-07-06T17:32:58.616648500Z" />
    <EventRecordID>952</EventRecordID>
    <Channel>System</Channel>
    <Computer>DESKTOP-14CPKUF</Computer>
    <Security />
    </System>
    <EventData>
    <Data>nvlddmkm</Data>
    <Data>
    </Data>
    </EventData>
    </Event>
    Last edited by gmac1701; 07-07-2017, 08:57 AM. Reason: Additional info

  • #2
    Display driver nvlddmkm stopped responding and has successfully recovered.
    This means the video card device driver has crashed.
    Maybe you can contact nVidia about the fault.

    Comment


    • #3
      I also got the error "3D Test interrupted", but I cannot found any video card device driver crash from system event.
      From the Burin log, found some error as below.
      Need your help to check it. Thanks.
      LOG NOTE: 2017-10-25 03:35:52, 3D test: Render error code (8876086c)
      LOG NOTE: 2017-10-25 03:35:52, 2D Graphics, Display Frame (3) failed with Error Code: 0xFFFFFFFF
      LOG NOTE: 2017-10-25 03:35:52, 2D Graphics, 2D test error, code: Unknown
      LOG NOTE: 2017-10-25 03:35:52, 2D Graphics, DisplayFrame (1) returned Error Code: 0x887601C2
      LOG NOTE: 2017-10-25 03:35:52, 2D Graphics, Surface lost: Restoring.
      LOG NOTE: 2017-10-25 03:35:52, 2D Graphics, Restore all surfaces
      WARNING: 2017-10-25 03:35:52, 3D Graphics, The 3D test was interrupted
      LOG NOTE: 2017-10-25 03:35:52, 3D Graphics, The 3D test was interrupted or there was an error during the rendering of the 3D scene [2289436780, 50].
      LOG NOTE: 2017-10-25 03:36:01, 2D Graphics, Display Frame (3) failed with Error Code: 0xFFFFFFFF
      LOG NOTE: 2017-10-25 03:36:01, 2D Graphics, 2D test error, code: Unknown
      LOG NOTE: 2017-10-25 03:36:01, 2D Graphics, DisplayFrame (1) returned Error Code: 0x887601C2
      LOG NOTE: 2017-10-25 03:36:01, 2D Graphics, Surface lost: Restoring.
      LOG NOTE: 2017-10-25 03:36:01, 2D Graphics, Restore all surfaces

      Comment


      • #4
        I get this error when I forget to set proper power setting. Could this be caused by display turning off during tests?

        I tried to reproduce this just now and burnintest seems to keep the display on this time... So now I'm not that sure.

        Comment


        • #5
          You can get this error for a variety of other reasons as well. See this page for details.
          https://www.passmark.com/support/bur...nterrupted.htm

          Comment

          Working...
          X