I run BIT standalone version (1013) from a CD. At the end of the process, the command rd /s /q erases all but cu.exe.
I also put a command sleep 1 to delay 1 second before remove the folder, but cu.exe survives.
On some other systems, it is gone.
All OSs are XPpro sp2.
I do not know why?
The typical way to run BurnInTest from a CD is to copy the "zip" version of BurnInTest Pro to a CD (as per the online FAQ) and then run the BurnInTest from the CD. If this is what you are doing, I am not sure why you need to delete cu.exe, as this should also be run from the CD (by BurnInTest). I would have thought that you would only need to remove a directory if you created a temporary directory on the systems hard disk such as for log files (which would not contain cu.exe)?
FYI, cu.exe may wait approximately 10 seconds after BurnInTest closes before cu.exe closes.
I run BIT from a CD in a complete Windows OS.
According to your instruction, I create a temp folder for BIT on the hard disk and delete it after done.
May I ask what is cu.exe's functionality? < clean ultilities?>
Last edited by thanh; 11-03-2006 at 04:48 PM.