problem with BartPE ramdisk in BurnInTest

[yannickd]

I have created a BartPE Live CD with BurnInTest, to test new servers.
On startup all the available disks are automatically mounted and formatted.
After that BurnInTest automatically starts for 48 hours.

Now I checked "Select all Hard Drives" in burnintest configuration but when the
test runs it obviously also tests the B: RamDisk, which gives errors during the test.

INFORMATION: 2006-08-25 18:06:33, Disk, B: Test file could not be created
LOG NOTE: 2006-08-25 18:06:33, Disk, File name: B:\~bittestB00001, Error Code: 32

Is there a way to exclude this one disk from the test?

[David (PassMark)]

There are really only two options as far as the selection of hard drives go.

You can either automatically select all drives for testing or you can pick a fixed list of drives to test.

If each machine you test is different and the automatic option doesn't work for you, then you could create 2 or 3 different configuration files. Each configuration file would be preset with a different combination of drive letters, corresponding to your common disk configurations.

Another possibility might be to work out why there is an error creating a file on the RAM disk, then use the automatic option.

[yannickd]

There was something wrong with the disk mounting program, now it seems to work fine. But thanks anyway for replying.