can not wakeup after using SLEEPER.EXE

[rolfe]

Hi, I'he tried sleeper.exe (regarding sleeper: as far as I remember I have nothing configured, so I have used is as downloaded ).
No I got the problem, that I'm not able to wake up the PC anymore...

HW RESET does not work.
POWER OFF/ON (front of PC) does not work.
POWER OFF/ON (backside) is the only method so far to force a reboot.

What can i do to switch to the state bevor using sleepe.exe???

----------------------------------------------------
Attached is my configuration:

SiSoftware Sandra
System
Hostname : 3200MHZ
Benutzer : Rolf
Arbeitsgruppe : MSHOME
Prozessor
Modell : AMD Athlon(tm) 64 X2 Dual Core Processor 6400+
Geschwindigkeit : 3.33GHz
Modellnummer : 6400
Kerne pro Prozessor : 2 Einheit(en)
Threads pro Kern : 1 Einheit(en)
Typ : Low Power, Dual-Core
Interner Datencache : 2x 64kB, Synchron, Write-Back, 2-weg Satz, Exklusiv, 64 Byte Zeilengröße
L2 Onboard Cache : 2x 1MB, ECC, Synchron, Write-Back, 16-weg Satz, Exklusiv, 64 Byte Zeilengröße
System
System : To Be Filled By O.E.M. To Be Filled By O.E.M.
Platform Compliance : AMD LIVE!
Mainboard : ASRock ALiveDual-eSATA2
Bus(se) : AGP PCI PCIe IMB USB i2c/SMBus
MP Unterstützung : Nein
MP APIC : Ja
System BIOS : American Megatrends Inc. P1.50
Gesamtspeicher : 3.19GB DIMM DDR2
Chipsatz
Chipsatz
Modell : Acer (ALi/ULi) ULi M1695 K8 Northbridge with PCI-Express and hypertransport
Front Side Bus Geschwindigkeit : 2x 832MHz (1.66GHz)
Chipsatz
Modell : AMD Athlon 64 / Opteron HyperTransport Technology Configuration
Front Side Bus Geschwindigkeit : 2x 832MHz (1.66GHz)
Gesamtspeicher : 4GB DIMM DDR2
Speicherbusgeschwindigkeit : 2x 333MHz (666MHz)
Grafiksystem
Adapter : ATI Radeon HD 3470 (256MB, PCIe 2.00 x16, PS3.0, VS3.0)
Grafikprozessor
Adapter : ATI Radeon HD 24XX (RV610) (1.01, 256MB)
Physische Speichergeräte
WDC WD1600JB-00EVA0 160GB (ATA100, 3.5", 7200rpm, 8MB Cache) : 149GB (F)
NVIDIA STRIPE 372.62G 400GB (SCSI, NCQ) : 373GB (C (D (E
TSSTcorp CDDVDW SH-S202H (ATAPI, DVD+-RW, CD-RW, 2MB Cache) : k.A. (J
AXV CD/DVD-ROM (SCSI, SCSI-2, DVD+-R, CD-R, 512kB Cache) : k.A. (G
ROXIO DVD-ROM EMULATOR (SCSI, SCSI-2, DVD-R, CD-R, 4kB Cache) : k.A. (H
Logischer Speichergeräte
Incoming (F : 149GB (NTFS) @ WDC WD1600JB-00EVA0 160GB (ATA100, 3.5", 7200rpm, 8MB Cache)
System (C : 122GB (NTFS) @ NVIDIA STRIPE 372.62G 400GB (SCSI, NCQ)
Raid0 (D : 166GB (NTFS) @ NVIDIA STRIPE 372.62G 400GB (SCSI, NCQ)
Downloads (E : 85GB (NTFS) @ NVIDIA STRIPE 372.62G 400GB (SCSI, NCQ)
CD-ROM/DVD (J : k.A. @ TSSTcorp CDDVDW SH-S202H (ATAPI, DVD+-RW, CD-RW, 2MB Cache)
CD-ROM/DVD (G : k.A. @ AXV CD/DVD-ROM (SCSI, SCSI-2, DVD+-R, CD-R, 512kB Cache)
CD-ROM/DVD (H : k.A. @ ROXIO DVD-ROM EMULATOR (SCSI, SCSI-2, DVD-R, CD-R, 4kB Cache)
3.5" 1.44MB (A : 1MB (FAT)

Windowssystem : Microsoft Windows XP (2002) Professional 5.01.2600 (Service Pack 3)

[David (PassMark)]

Problems with Sleep and Hibernation are common. Very few PCs work correctly in this area. The older PC's almost never work correctly. Problems are typically related to bad device drivers and are nearly impossible track down for a home user.

Sleeper don't change any settings on your PC. But some control over the behaviour is possible from the Windows control panel.