get PT7 to run with out getting the 3D test error?

[mikeschn]

I just downloaded and ran Performance Test 7 on my HP dv2945 SE. It ran fine, but it did not run the directx tests because it said directx10 was not installed.

So I installed directx10,and then reinstalled PT7. (The install made a note that it was modifying the directx files.)

Now I get the error "The 3D test was interrupted or there was an error during the rendering of the 3D scene. The results for this test will not be used." ***(see edit)

I am a registered user of PT6, and PT6.1 runs just fine, albeit the scores are lower than in 7.

So what do I have to do to get PT7 to run with out getting the 3D test error?

Thanks,

Mike...

***Edit: and then the next window says "No DirectX 10 capable video device found." My nvida card doesn't support directx10? :0

[David (PassMark)]

Only 1 of the 3D tests use DirectX 10. The others still use DirectX9.

What O/S are you running?
What Video card do you have?

DirectX 10 is only available in Vista, and it comes with Vista. You can't actually install it. So I am not sure what you are refering to.

Further not all video cards support DirectX 10. The older the card the less chance you have of getting DirectX 10 support.

[mahmoud]

I have the same problem.
OS: Vista 32 - SP1
Graphic card: ATI Radeon 2400 HD
Driver Version: 8.582.0.0
Driver Date: 03 Feb 2009

[David (PassMark)]

As the first poster had an NVidia card and unknown O/S, and you have an ATI card with Vista, and didn't mention what error you see. It is hard to comment on if the issue is the same issue or not.

[mahmoud]

Sorry for this mistake, when I said "I have the same problem", I mean the same problem as the the first poster. I installed PT7 on my PC which has Vista-SP1 as OS, and ATI Radeon HD2400 as graphic card, and I've got the message "The 3D test was interrupted or there was an error during the rendering of the 3D scene. The results for this test will not be used."
Is it clear now?
So what do I have to do to get PT7 to run with out getting the 3D test error?
Thanks.

[David (PassMark)]

Something on your PC is preventing DirectX 10 from running. Despite being a slower card the HD2400 claims to support DirectX10.

Do the other (DirectX9) 3D tests run OK in PerformanceTest?

[mahmoud]

The 3 tests of DirectX 9 give the following results on my Vista-SP1:

Graphics 3D - Simple: 68.5
Graphics 3D - Medium: 27.6
Graphics 3D - Complex: 12.2

The driver version is the latest one from ATI: 8.582.0.0 (date: 03-Feb-2009)

[Gubber22]

I am getting the same error as the other two users are, has the solution been found?
I am Running
MSI 790GX Platinum
AMD Phenom 2 X4 940
Two Radeon HD 4350 Crossfire
8 GB Kingston Hyper Ram.
Vista Ultimate
All the other test run fine but on the Direct X10 it gives me the same error. I tried to update DirectX but installer said I had the latest.
I haven't bought PT yet running trail ver. but as soon as I get all these test to pass I will purchase.
Any help anyone?

[David (PassMark)]

If you take it out of crossfire mode does it work?
What driver version do you have?
If you run dxdiag.exe (installed with Windows) does it report DirectX 10 and does it report acceleration enabled.
Are you running 32bit or 64bit O/S?
Are you running 32bit or 64bit PerformanceTest?

Did you try any other DirectX10 applications. e.g.
The nVidia Cascades demo
http://www.nzone.com/object/nzone_ca...downloads.html
Call of Juarez DirectX 10 Benchmark
http://downloads.guru3d.com/download.php?det=1642
Ruby Whiteout DirectX 10 demo from ATI/AMD
http://ati.amd.com/developer/demos/rhd2000.html
Ping Pong DirectX 10 demo from ATI/AMD
http://ati.amd.com/developer/demos/rhd3000.html

[PnenomII 920 NL]

Same problem for me.

PhenomII 920, Vista Ultimate 64 sp1, Gigabyte MA78GM 780G board, Radeon 3200 IGP, Catalyst 9.3.

Demo ATI Whiteout no problem.