Running BurnInTest from CD

[Anonymous]

Hello David & thank you for your reply.

I have again checked with the demo version V4.0 Std Build 1019 and get " Error opening file D:\Programs\BurninTest\bit.exe"

Because the demo runs for 15min, I set only Cd-Rw\DVD on @ 100% and evey other test was off.
Summary was " CD\DVD Cycle:2 Op's: 2104 million Error:2 Could not open file on CD\DVD for testing"

Please advise if I need to change any settings, and I am happy to test any patches etc.

Regards,
Steve A

[Anonymous]

Hello Passmark.

Is there any update to my mail of 6 Jan 2005 ?

Regards,
Steve Allen

[Ian (PassMark)]

Sorry for the delay in responding.

The current version of BurnInTest does not support test CDs that contain Multi-byte characters in the filenames (e.g. Japanese filenames). Could you please check that your CD does not contain such files.

Best regards,
Ian
PassMark Software

[allens]

Hello

We have recently updated to BurnIn Test V5.1 and our intial testing confirms that the CD tests now run successfully under XP when running bit from CD.

It still fails under BartPe. Here is a section of the log:

CD/DVD (X 3 2.800 Billion FAIL 15 Could not open file on CD/DVD for reading
SERIOUS : 2007-01-31 21:34:12, CD/DVD, X: Could not open file on CD/DVD for reading
SERIOUS : 2007-01-31 21:34:12, CD/DVD, Error opening file X:\I386\SYSTEM32\config\default
SERIOUS : 2007-01-31 21:34:12, CD/DVD, Error opening file X:\I386\SYSTEM32\config\sam
SERIOUS : 2007-01-31 21:34:12, CD/DVD, Error opening file X:\I386\SYSTEM32\config\security

etc.

Have I missed something from your BartPe guide?
Can Bit be setup to skip these files.

Regards,
SteveA

[Ian (PassMark)]

We will change BurnInTest V5.2 (due in the next few days) to skip the following CD files when run from BartPE:

X:\I386\SYSTEM32\CONFIG\DEFAULT
X:\I386\SYSTEM32\CONFIG\SAM
X:\I386\SYSTEM32\CONFIG\SECURITY
X:\I386\SYSTEM32\CONFIG\SOFTWARE

Regards,
Ian

[allens]

Thanks for the prompt reply.
Are you indending ( or does it already do this) BurnIn Test to automatically detect that it is running under BartPe?
I will try it as soon as it is released. Will our V5.1 key also work for V5.2?

Regards,
SteveA

[Ian (PassMark)]

BurnInTest already detects that it is running under BartPE - but all this is used for is to change some of the information/warning message text.

A V5.1 key will work with V5.2.

Regards,
Ian

[allens]

Thanks for the help.

Regards,
SteveA

[allens]

Hello,

I have downloaded V5.2 and I am still getting the CD error when running from BartPE. Here is part of the log:

================================================== ======
BurnInTest V5.2 Pro 1004
Logging detail level: Normal
******************
SYSTEM INFORMATION
******************
Network Name: MININT-89C199
Date: 02/14/07 02:42:03
Operating system: Unknown or new O/S build 2600
Number of CPUs: 1
CPU manufacturer: GenuineIntel
CPU type: Pentium III
CPU features: MMX SSE PAE
CPU1 speed: 598.4 MHz
CPU L2 Cache: 256 KB
RAM: 576 MB
Video card: (Resolution: 1024x768x

**************
RESULT SUMMARY
**************
Test Start time: Wed Feb 14 09:28:56 2007
Test Stop time: Wed Feb 14 09:41:26 2007
Test Duration: 000h 12m 30s
Test Name Cycles Operations Result Errors Last Error
CPU - Maths 155 8.180 Billion PASS 0 No errors
CPU - SIMD 121 6.922 Billion PASS 0 No errors
Memory (RAM) 1 1.371 Billion PASS 0 No errors
2D Graphics 222 1.449 Million PASS 0 No errors
Disk (B: RAMDisk) 513 216 Million PASS 0 No errors
Disk (C: ) 1 1.158 Billion PASS 0 No errors
CD/DVD (X 1 293 Million FAIL 4 Could not open file on CD/DVD for reading
TEST RUN FAILED
******************
DETAILED EVENT LOG
******************
LOG NOTE: 2007-02-14 09:28:56, Status, PassMark BurnInTest V5.2 Pro 1004
LOG NOTE: 2007-02-14 09:28:56, Status, Main Tests started
LOG NOTE: 2007-02-14 09:29:00, Disk, Drive C: SMART attribute data
LOG NOTE: 2007-02-14 09:29:00, Disk, Model WDC WD400BB-75FJA1, Serial# WD-WCAJC1426861
LOG NOTE: 2007-02-14 09:29:00, Disk, Power on hours count: 15366
LOG NOTE: 2007-02-14 09:29:00, Disk, Power cycle count: 209
LOG NOTE: 2007-02-14 09:29:00, Disk, Temperature: 34C
LOG NOTE: 2007-02-14 09:29:00, Disk, All other SMART attributes within thresholds.
LOG NOTE: 2007-02-14 09:37:51, Disk, C, SMART Reallocated Sector Count start value: 0, current value 0
SERIOUS : 2007-02-14 09:39:59, CD/DVD, X: Could not open file on CD/DVD for reading
SERIOUS : 2007-02-14 09:39:59, CD/DVD, Error opening file X:\I386\SYSTEM32\config\default
SERIOUS : 2007-02-14 09:40:00, CD/DVD, X: Could not open file on CD/DVD for reading
SERIOUS : 2007-02-14 09:40:00, CD/DVD, Error opening file X:\I386\SYSTEM32\config\sam
SERIOUS : 2007-02-14 09:40:00, CD/DVD, X: Could not open file on CD/DVD for reading
SERIOUS : 2007-02-14 09:40:00, CD/DVD, Error opening file X:\I386\SYSTEM32\config\security
SERIOUS : 2007-02-14 09:40:00, CD/DVD, X: Could not open file on CD/DVD for reading
SERIOUS : 2007-02-14 09:40:00, CD/DVD, Error opening file X:\I386\SYSTEM32\config\software
LOG NOTE: 2007-02-14 09:41:30, Status, Test run stopped

For test purposes only I am running BIT 5.2 from a network share location and V5.1 is still located on the CD but I do not see this being relevent.
Does it look as if I am doing everything as you expected?

Regards,
SteveA

[allens]

Do you have any update on this?

Regards,
SteveA