PassMark Software
Global (Go to Australian site)

Announcement

Collapse
No announcement yet.

Burnintest with BartPE, HDD testing?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Burnintest with BartPE, HDD testing?

    I recently set up BartPE to use Burnintest 6.0. I noticed that the software is unable to test hard drives in the system unless they have been partitioned.

    Is there a way to test these raw, or some other quick way to partition these for testing?

  • #2
    Under BartPE and WinPE, the BurnInTest disk test needs to be formatted and have a disk volume letter.

    Whilst not exactly the same, our WinPE document covers how to partition a drive to test (this was from a user contribution), you may be able to use a similar approach:
    http://www.passmark.com/ftp/BIT_WinPE_v1.1.pdf

    Regards,
    Ian

    Comment

    Working...
    X