Burn-In Test Installation

[PLGAG]

hello passmark team,

to set up your burn-in test application in our system tests we try to automate to run tests "unatended". as you describe in a prevous post I can call "bit.exe" with a "cfg-file" from cmd-line. this works very fine, but we already have the problem that each system has to be registered once with username and password.
Is there a way to avoid this e.g. import the registry key's only?

an additional question:

in order to perform an external start (passmark is not installed at the system disc) from fdd/cd-rom may I transfer the passamrk-directory to system only?

many thx
and best regards

Tobias Feix, PLG AG (Germany)

[passmark]

Yes.

We have a version of the software that doesn't have the installer and can be run directly from a CD / Floppy / USB drive / Hard disk. Here is the link for the current release of BurnInTest professional, without an installer.
http://www.passmark.com/ftp/bitpro.zip

This version also allows the user name and license key to be read from a file (key.dat). This avoids the need to enter it each time.

Making a key.dat file
------------------------

Create an ASCII text file.
- The first line in the file must contain the username.
- The second line must contain the licence key

Save the file in the same directory as bit.exe with a file name of key.dat. Here is an example key.dat

Joe Somebody
4RAJ-34E7-YU1I-4UH4-1DBV-7NP9-92Q4

(Of course, this example is not a valid key and you need to use your own)

Also, when running BurnInTest this way, there will be no files left on the PC after BurnInTest has finished

David
PassMark