Intermittent Problem Starting Wirelessmon

[dozment]

I'm using wirelessmon in trial mode, and would like to register it. However, I am having intermittent problems getting it to start. I'm using Windows XP Pro and the current published version of wirelessmon. When I start it and tell it to run in trial mode I get a "wirelessmon.exe has encountered a problem" error. I used it successfully yesterday. In fact, I'm using my wireless card at a free hotspot that wirelessmon helped me find yesterday.

I was able to start it in debug mode based on another post here. Following is the contents of the debut file:

0.000s - DEBUG: Starting...
0.010s - DEBUG: WirelessMon V1.0 Build: 1004
0.010s - Debug: OS 5.1.2600.2 (2.0)
0.010s - DEBUG: New Instance of WLAN802_11 class initialized successfully
0.010s - DEBUG: Service control manager opened
0.010s - DEBUG: Network Driver Interface service opened
0.010s - DEBUG: Network Driver Interface started
0.010s - DEBUG: Network Card Service has been started successfully
0.030s - DEBUG: Tab Control has been created successfully
0.040s - DEBUG: Windows major version: 5 windows minor version:1
0.040s - DEBUG PERF: Found perf functions in DLL
0.040s - DEBUG: Graphic has been Initiailized successfully
0.120s - DEBUG: Begin to Enumerate Devices
1.512s - Debug: Network card 1: VMware Virtual Ethernet Adapter for VMnet2 \DEVICE\{6CABF863-460E-434D-9267-4DE7657D8CB3}
1.512s - Debug: Network card 2: VMware Virtual Ethernet Adapter for VMnet8 \DEVICE\{DC1E41EC-1A2D-4194-88F9-1C9DA726869F}
1.512s - Debug: Network card 3: VMware Virtual Ethernet Adapter for VMnet1 \DEVICE\{AC0DF2F8-2B1A-417B-9157-08F37F53BBE4}
1.512s - Debug: Network card 4: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport \DEVICE\{452B3809-E8BD-4B1F-B2AE-535CF5583009}
1.522s - Debug: Network card 5: Wireless-G Notebook Adapter v.2.0 - Packet Scheduler Miniport \DEVICE\{745A26FB-1C10-42E7-8923-C69D2AAA965C}
1.522s - DEBUG: Network card 5 has been selected by string parse
1.522s - Debug: successfully opened this device: \DEVICE\{745A26FB-1C10-42E7-8923-C69D2AAA965C}
1.522s - DEBUG: GetSSID function return OK
1.522s - DEBUG: return ssid length: 15
1.522s - DEBUG: MAC Address read OK
1.532s - DEBUG: Signal strength read OK
1.532s - DEBUG: txpower, antenna, auth mode read OK, Begin to find access point nearby

[Anonymous]

The trace you include in your post just shows that everything worked as expected on that attempt.

It would be good if you could post the same log file from a attempt that had the error.

Also if you could give us the exact text of the error message. That might help.

----
David

[dozment]

The log file was from a failed attempt. It worked when I was at home last night within range of my access point. Today, in the area where I am working it initially worked, failed yesterday and again today. I am connected to an access point right now. I brought the app up again to try to generate the error, and it worked.

The error was a generic Windows XP "the application is not working properly, click here to send info to us" kind of message. I couldn't find details of a dll that died or anything useful in the message. I will capture it next time I see the error, and post the exact message here.

Thanks!

[passmark]

Yes, you're right, the log terminates abruptly. We'll investigate it.

Those "Generic" errors are in fact almost never generic.

There is usually a message like, "To see what data this error contains, _Click_here_"

It is the information that appears after you click which is interesting. In particular there might be an address like, 0x00451234 which is important.

----
David

[dozment]

Ok, it finally happened again. I thought it heard us talking, and decided it was going to act properly!

The error signature section of the message says:
AppName:wirelessmon.exe
AppVer 1.0.1004.0
ModName: ntdll.dll
ModVer:5.1.2600.2180
Offset: 00011639

From the technical information link, the Exception Information:
Code 0xc0000005
Flags 0
Record 0
Address 0x000000007c911639

It also refers to an xml file that it created in a temp directory. The contents of that file follow...

<?xml version="1.0" encoding="UTF-16"?>
<DATABASE>
<EXE NAME="WirelessMon.exe" FILTER="GRABMI_FILTER_PRIVACY">
</DATABASE>
.....

Let me know if you need more info.

Thanks!

[TimR]

There is a new build of WirelessMon that has had a few changes made and some extra debugging output added, http://www.passmark.com/ftp/wirelessmon1.1004-1.exe.

Could you please try this version out with the DEBUGMODE parameter and if it crashes please send us the WirelessMonTestLog.txt file.

Thanks.

[dozment]

I tried yesterday while near an AP, and the new version worked flawlessly. It also closed properly when I shut it down. On the earlier version I was getting a similar error every time I shut down. I tried today outside the presence of an AP, and it failed. The contents of the log file follows:

0.000s - DEBUG: Starting...
0.000s - DEBUG: WirelessMon V1.0 Build: 1004-1
0.000s - Debug: OS 5.1.2600.2 (2.0)
0.010s - DEBUG: New Instance of WLAN802_11 class initialized successfully
0.010s - DEBUG: Service control manager opened
0.010s - DEBUG: Network Driver Interface service opened
0.010s - DEBUG: Network Driver Interface started
0.010s - DEBUG: Network Card Service has been started successfully
0.030s - DEBUG: Tab Control has been created successfully
0.030s - DEBUG: Windows major version: 5 windows minor version:1
0.040s - DEBUG PERF: Found perf functions in DLL
0.040s - DEBUG: Graphic has been Initiailized successfully
0.060s - DEBUG: InitCounter entry
0.070s - DEBUG: All strings Wireless-G Notebook Adapter v.2.0 - Packet Scheduler Miniport
0.080s - DEBUG: Wireless-G Notebook Adapter v.2.0 - Packet Scheduler Miniport
0.080s - DEBUG: Intel[R] PRO_100 VE Network Connection - Packet Scheduler Miniport
0.080s - DEBUG: MS TCP Loopback interface
0.080s - DEBUG: InitCounter exit
0.080s - DEBUG: Begin to Enumerate Devices
1.222s - Debug: Network card 1: VMware Virtual Ethernet Adapter for VMnet2 \DEVICE\{6CABF863-460E-434D-9267-4DE7657D8CB3}
1.222s - Debug: Network card 2: VMware Virtual Ethernet Adapter for VMnet8 \DEVICE\{DC1E41EC-1A2D-4194-88F9-1C9DA726869F}
1.222s - Debug: Network card 3: VMware Virtual Ethernet Adapter for VMnet1 \DEVICE\{AC0DF2F8-2B1A-417B-9157-08F37F53BBE4}
1.222s - Debug: Network card 4: Wireless-G Notebook Adapter v.2.0 - Packet Scheduler Miniport \DEVICE\{745A26FB-1C10-42E7-8923-C69D2AAA965C}
1.232s - Debug: Network card 5: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport \DEVICE\{452B3809-E8BD-4B1F-B2AE-535CF5583009}
1.232s - DEBUG: Network card 4 has been selected by string parse
1.232s - Debug: successfully opened this device: \DEVICE\{745A26FB-1C10-42E7-8923-C69D2AAA965C}
1.232s - DEBUG: GetSSID function return OK
1.232s - DEBUG: return ssid length: 1
1.242s - DEBUG: MAC Address read OK
1.242s - DEBUG: Signal strength read OK
1.242s - DEBUG: txpower, antenna, auth mode read OK, Begin to find access point nearby
1.242s - DEBUG: SetAccessPoint entry
1.242s - DEBUG: Get AP list information
1.252s - DEBUG: GetAPList entry
1.252s - DEBUG: sent m_dwIOCTL_NDISUIO_SET_OID_VALUE
1.252s - DEBUG: sent m_dwIOCTL_NDISUIO_QUERY_OID_VALUE

I tried again near an AP, and it worked once again. I can't help but wonder if it is failing to start when it can't detect a single AP.

I hope this helps. Today is the end of my trial. Unless there is a way to extend the trial I will not be able to test further. If this can be resolved I do plan to purchase a licensed version. If you would like for me to test further you can contact me at dan@ozment.net to help me extend the trial period.

Regards,
Dan