View Full Version : BurnInTest
- Burn In test - system time stopped
- Selecting Line In automatically, possible?
- Burn in testing for small CPU boards
- Test Certificate Question
- Tape test
- BurninTest 5.3 build 1036 serial receive overrun
- WINPE issue
- Testing USB Flash drive - what Serious Error means?
- BurnInTest Shuts itself Down
- Question about the slider bars regarding cpu tests
- DirectIO Error during BurnIn tests
- Only 4GB memory size can be detected with Linux Version
- BurnInTest causes system reboot
- Printing Customer Certificate
- Monitor blanks while running 3D test
- Error on startup
- Burnin test exiting gracefully with a kill
- Error While Writting to Disk
- Licencing and support for BurnInTest v5.3
- # of CPUs supported?
- Custom Real World application testing?
- HDD test display ERROR--inefficiency reading or writing
- BurnInTest doesn't reports any failure after several tests
- RS-485 testing
- error verifying data in ram / 2d video memory corruption
- Run multiple cfg files with Linux burnin
- Optical Drive Test for BurnIt V2 for Linux
- Sensor/Temps in BIT 2.0 for Linux
- 2D error "video memory corruption" and PCIe error
- Timeout waiting for packet
- Version question
- 100% operation of tests
- Serial ports problem
- It’s failed in 2D Graphics test and show ‘video memory corruption’
- Blue screen of death with Win7 in driver ataport.sys
- Linux CD Drive mount name
- Combo Drive sometimes disappears when running BurnInTest 6.0
- logging problem BIT6
- BITPro 6.0 + WinPE 3.0 works fine, and question
- PassMark Rebooter crashes in w2k3.
- BIT detecting phantom floppy drive
- trouble with loopback mode in USB2Test
- Error: "The 3D test was interrupted" when disconnecting monitor from system
- Burnintest with BartPE, HDD testing?
- 64-bit BurnInTest, Advanced network test: unable to load performance counters
- Burn-in Test with Clarkdale 2.93 program will auto close.
- Unable to get disk Volume extent information - network disk
- System crashes when running 3D test
- Video Memory Corruption
- Updating BurninTester from 1014 to 1016 settings
- I want to thermal measurement test
- ATI 9.11 catalyst driver issues - 2D test.
- usb 3.0
- missing libraries
- New PC Failed 2 tests - next step?
- Increase from 10 usb test devices??
- Run BurnInTest from USB drive
- SERIOUS: Maths, System unable to allocate memory resource
- BSOD occurs while performing Brun in 6
- Error message"Access violation at........
- Network packet loss due to audio usage, Win7
- Problem with 2D graphics test
- command line for auto installation
- Intermittent error: Floating Point Addition
- System clock loses time
- System Summary Information on Certificate
- Getting video memory corruption
- bit linux - cmdline
- CPU maths occupies all of the cpus
- Run Burnin test via console?
- BurninTest 6.0 pe2 mode using usb
- BitLinux - HDD test uses /root/ folder
- burnintest 6.0.2 pe2 testing hd
- WinPe 3.0 & bt1019 bug
- BitLinux Machine ID and notes
- Run BurnIn test via serial console
- DVD Drive Test RHEL5.2
- BurnInTest as a load simulator
- BurnInTest crashing under Linux
- Optical Drive Test
- Post-Script Problem
- Sound loop back, please help
- BurnIn 5.3 and 2D tests
- Win 7 64 Crashes randomly to black screen
- Compatability with Windows Embedded Standard?
- Error reported by Windows BurnIn, not Linux
- When is CPU Speed measured? Bitpro 6.0.1019
- How to continue with it - error while loading shared libraries
- 3D test fail when testing more than 1 window
- Serial Port test failed with BurnIn test tool under SLES11 64bit.
- Sound Loopback Test - No operations reported in timeout period
- Network Timeout Errors
- BSOD during RAM test
- Recognising all 4gb ram?
- Burn it test fails after 20 hours
- BurnInTest Linux not recognising some USB 2 test plugs
- 64-bit RAM Multi-Process Torture test Starts slowly...
- SMART bad status not detected
- BurnInTest Win 7 x86 BSOD on Q57 chipset based motherboards
- Test coverage
- CDRom test in Linux cmd line mode
- Burn-InTest V6.0 - Error while reading from the disk
- RS422 Tests fails
- Advantage/Difference of running USB2 Test Plug vs. USB-disk test
- Bootable USB (UFD) - Network & Usb :)
- Stress test for CPU
- V6.0 1020 "The 3D test was interrupted"
- BurnInTest failed on ttyXR0 (serial port)
- Changing BurnInTest Load Config location
- Passmark scripting CLI files
- By-pass System Information Collection
- burnintest version difference
- serial port test
- BurnIn Test Pro 6.0 Stopped Working Issue
- Installation and registration is time consuming
- Burnin V6.0 64-bit Sound Errors
- BIT V2.0 build 1006 for Linux Issue
- BurnInTest V5.3 pro (1004) with Error "access violation at 0x55594FD8"
- BurnInTest Coverage
- Serial Port error
- Disk Error(Insufficient system resources to complete test)
- Disk full with BurnInTest for Linux command line
- Error Verifying Data on RAM
- CPU Usage@100% when only RAM test is selected
- laptopo freezing - burnin test failed
- BurnInTest Linux Version 3 Beta
- Advanced Network 1gb/s speeds
- Error: 2D Graphics, Surface lost: Restoring
- PassMark USB 2.0 Loopback Plug test coverage
- RAM Errors (only during enabled CPU-Load), no errors @MEMTEST 4.1
- PassMark ported to Windows Embedded ?
- Auto-Stop bug report (non-critical)
- can we install evaluation burnintest on the bootable device?
- Does Burnin bypass processor pstates?
- test CPU multi cores i5, i7
- BurnInTest Linux Version 3 Release
- COM issue with BurnIn Professial V6.0
- system lag when running RAM test
- 3D test using proprietary nvidia/ati/etc drivers vs vesa driver
- I'm running a BurninTest + Sleeper with a FireWire 400/800 drive enclosure.
- Butterfly seeking error - Unable to get disk Volume extent information-network disk
- Bitpro 6 64-bit @erver 2008 crashes.
- how to test hidden partition in burnintest?
- WinPE and BartPE Errors
- Video Memory Corrupt
- Failed to play back MIDI via sequencer error
- devcon error for WinPe 3.0
- Multiple PCMCIA device test problem
- BurnInTest network test failed only at Win7 64
- EMV Test
- Errors in RAM -Error Verifying Data in RAM
- Bought the 64bit version, now need BartPE ?
- Quit PassMark when finished
- BartPE - Burn test not running
- WARNING:3D Graphics, No operations reported in timeout period
- Shared library error : GBLIC 2.5 or higher needed, not sure what to do next
- 3D and video playback run abnormally on switchable graphics with BurnIn test pro 6
- verifying data in RAM---Data verify error: 0x1390D960
- False positive on BurnInTest Pro 32bit by Sonicwall
- Burn In Test only reads and writes to memory as root
- Can you execute .bits scripts at startup in Linux
- Serial Testing Issues
- USB 3.0 Loopback?
- SSE4a Failures
- Serial port test throughput issue
- How to test burnin test with Network
- BurnInTest DDR test error.
- Startup Error Number 4
- Linux Command line test does not see disk drives
- BIT causes system reboot
- CPU Thermal reads 0 celcius
- How to full load a 64 bit processor?
- No operations reported in timeout period
- Error verifying data in RAM
- linux version 3 command line disk test displays all 0's
- what have been tested in SSE3 or SSE4a
- How to keep test data when error occurred?
- Live CDs and Burnintest for Linux Version 3
- COM port test error message
- BurnInTest logging after time update
- BurninTest for Linux fails to test Startup Disk
- BurnInTest 7.0 Beta available
- What algorithm does BIT uses for prime number generation?
- BIT 6 Build 1030 64-bit 3D Test Failure
- bitpro64 linux logging
- Linux Hangs
- USB 2.0 API and Labview
- Com port show "no operations reported in timeout period"
- Unable to get disk Volume extent information
- Test file could not be created. Check access privileges and Data Verify failure
- Linux "libQtWebKit.so.4" error
- PassMark Rebooter crashes in WINXP
- DirectDraw object creation not possible
- possible tests for laptop
- Burn in test Log report
- "Low on memory" shows on Burin 5.3/ 6.0.
- Burn-in 6 USB 3.0 support
- Faulty RAM?
- BIT and 2008 R2
- Serious Errors in Ram Test!
- Network loopback tests
- Torture Test - Recommendations
- BurnIn Test v6.0--Disk Errors with mSATA SSD.
- Command line options for sleeper
- prefix in log file
- Linux missing library
- SMART threshold exceeding
- Server Testing (Xeon Processors)
- Optimal Burnin time for a system
- Burnin freezes when it is on ram and hdds are installed?
- RAM Test - Question
- Com port loopback test
- BurnInTest 7.0 launched
- burnintest vpro 6 32bit or 64 memory testing
- CPU Test and Torture Memory Test
- test multiple cards at once?
- Error while writing to the Disk
- COM port overrun error
- USB loopback plugs not foud by BurnIn Test V6.0
- DISM does not recognize...
- CPU Test of burnIn 5.3
- how to install BurnInTeste
- "Bad packet. Checksum incorrect" when test lan in v3.0(1002)linux
- Ethernet loopback test
- Is "block num" equal to LBA?
- Unknown Directx Error
- v7.0
- Two Memories - One Failed
- BurnlnTest 6.0.1023 test serial fail
- Motherboard serial number
- How to end BIT automatically
- Data Verify Failures
- How can I test the first block of a USB flash drive?
- BurnInTest Plugin Package
- Burn-in test configuration
- COM port test questions
- Software Exception Encountered Error
- How to run Advanced network test
- BIT 6 - Logs
- 100% load LAN test failed
- BIT DirectX Version Check - v6
- USB loopback test fail
- Burnin7.0 1004 have BSOD in XP
- Could I run the other programs together when the BurnIn 7.0 is in running??
- BIT 6 - Optical Drive Burn Test
- BIT 6 - Lid Test?
- Hardware failure detected?
- BIT 7 Internal loopback
- Failed to play back MIDI via sequencer
- Disk Test with RAID Support
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.